Home Categories Send inquiry

High reputation 2.5G RJ45 Connector - 1-1775133-1 8Pin Shielded Tab-Up RJ45 Ethernet Connectors 1×4 Quad Port – Zhusun

RJ connectors are mainly used for the connection and signal transmission between devices and components, components and cabinets, systems and sub-systems. They are widely used and are often used in various fields such as aviation, aerospace, military equipment, cars, and industry. Nowadays, electrical connection The variety of adapters is complicated. If you want to improve the reliability of electrical adapters, accurate selection of adapters is very important.

When choosing an RJ network connector, the first reference element is its own electrical parameters, because the electrical parameters require that the RJ connector is the main electromechanical component that connects the electrical circuit.

The extra voltage that must be considered is the additional voltage. The additional voltage is also called the operating voltage. It usually indicates the highest operating voltage marked by the manufacturer. It is mainly affected by the insulating material used by the connector and the distance between the touch pairs. Because some components and equipment may not be able to fully utilize all their functions if they are lower than their extra voltage, this element should also be considered when thinking about it, although many connectors produced today can still operate normally if they are lower than the extra voltage.

1-1775133-1 8Pin Shielded Tab-Up RJ45 Ethernet Connectors 1x4 Quad Port

Categories  Connectors, Interconnects
 Modular Connectors - Jacks
Application-LAN  ETHERNET(NoN POE)
Connector Type  RJ45
Number of Positions/Contacts  8p8c
Number of Ports  1x4
Applications Speed  RJ45 Without Magnetics
Mounting Type  Through Hole
Orientation  90° Angle (Right)
Termination  Solder
Height Above Board  13.40 mm
LED Color  With LED
Shielding  Shielded
Features  Board Guide
Tab Direction  UP
Contact Material  Phosphor Bronze
Packaging  Tray
Operating Temperature  -40°C ~ 85°C
Contact Material Plating Thickness  Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material  Brass
Housing Material  Thermoplastic
RoHS Compliant  YES-RoHS-5 WIth Lead in Solder Exemption

 

The RJ network cable has a total of 8 cores, and the colors are orange, blue, green, brown, white orange, white blue, white green, and white brown. The method of connecting the crystal head is as follows
(1) The wiring sequence of the crystal plugs at both ends of the network cable should be the same.
(2) The default wiring sequence is: white-orange, orange, white-green, blue, white-blue, green, white-brown, brown (summary summary: color sequence "orange blue green brown" "white first" "white blue white green change ")
After peeling off the outer gray cable with wire strippers (the stripping length is about 3cm), you need to straighten the wires. After arranging the color sequence, use scissors or wire strippers to cut the wires, and the remaining approximately (1.5-2cm)
Push the color line into the crystal head, clamp the front metal head with the holder, and hear a "click" to indicate that it has been clamped.
Test whether the network cable is intact and use a cable tester to test.

 

 


  • High reputation 2.5G RJ45 Connector - 1-1775133-1 8Pin Shielded Tab-Up RJ45 Ethernet Connectors 1×4 Quad Port – Zhusun Related Video: