HCJT4-812SK 8P8C Shielded Ganged 1×4 Quad Port Tab-Up RJ45 JACK

Product Detail

HCJT4-812SK 8P8C Shielded Ganged 1x4 Quad Port Tab-Up RJ45 JACK

Categories	Connectors, Interconnects
Categories	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x4
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	Without LED
Shielding	Shielded, EMI Finger
Features	Board Guide
Tab Direction	UP
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

RJ connector function use: power use RJ connector is necessary to transmit power. Generally, its voltage is very low. Generally used are the following two power transmission methods: dedicated to high-level current power touch transmission and parallel multilateral signal touch. Each of them has advantages and disadvantages. There are two differences between power transmission and signal transmission. The first and most notable one is that it is used to deliver higher currents. The current transmitted by the signal generally does not exceed 1 ampere, and does not exceed a few amperes, while the current transmitted by the power can reach tens or even hundreds of amperes. The second is the temperature increase due to Joule heating caused by the current. The Joule heat generated during the signal touch process is similar to the surrounding temperature. Conversely, the ratio of power transmission is based on the addition of temperature, and the increase of temperature generates a corresponding ratio current. The addition of a temperature of 30 degrees is generally used as a current ratio specification.

Product Tags

Ethernet RJ45 Connector