Leading Manufacturer for BOTHHAND connector - MTJ-88901-FSE-001 RJ45 Modular Telephone Jack 8P8C Right Angle Shlelded – Zhusun

Product Detail

MTJ-88901-FSE-001 RJ45 Modular Telephone Jack 8P8C Right Angle Shlelded

Categories	Connectors, Interconnects
Categories	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x1
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	Without LED
Shielding	Shielded
Features	Board Guide
Tab Direction	Down
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

Why does RJ connector appear false soldered RJ connector? We opened the RJ connector, and we saw that the solder joints were fake soldering, or the copper wire coil was broken. Why is this? It is fully testable on the RJ manufacturing end. But why are they leaked to the client application before they are discovered? The first is the RJ connector itself. RJ connector with false welding, although its circuit connectivity can achieve basic connection, it is not in good condition. As the environment changes, such as the influence of temperature or humidity on it, its connection performance becomes worse and worse, and then it will cause an open circuit. RJ connectors with damaged wires (commonly used 38# and 39# wires, which are relatively thin, and may be damaged at the manufacturing end). Secondly, its line connectivity is not in good condition although basic connections can be achieved. Similarly, as the environment changes, such as the influence of temperature or humidity on it, its connection performance becomes worse and worse, which will cause an open circuit.

Product Tags

8P8C RJ45 Connector