Good Quality RJ45 Connector - ARJ14A-MASA-A-B-EMU2 With Leds 100 Base-T Magnetic RJ45 Connector 1X4 – Zhusun

Product Detail

ARJ14A-MASA-A-B-EMU2 With Leds 100 Base-T Magnetic RJ45 Connector 1X4

Categories	Connectors, Interconnects
Categories	Modular Connectors - Jacks With Magnetics
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x4
Applications Speed	10/100 Base-T, AutoMDIX
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	0.537" (13.65mm)
LED Color	With LED
Shielding	Shielded, EMI Finger
Features	Board Guide
Tab Direction	Down
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

Regarding modular circuits, the selection of RJ connectors has a decisive effect. So when choosing RJ connectors, from which perspectives should we consider RJ connectors suitable for hardware use? 1, pin, distance The number of pins and the distance between pins are the basic basis for the selection of RJ connectors. The number of pins to choose the RJ connector depends on the number of signals that need to be connected. Regarding some patch type RJ connectors, patch headers and the number of pins should not be too much. Because in the soldering process of the placement machine, due to the high temperature effect, the plastic of the RJ connector will be heated and deformed, and the middle part will bulge, resulting in false soldering of the pins. The P800Flash programmer used this pin header and female header to connect between boards in the early stage of development. As a result, the pins of the prototype pin header were soldered in a large area. After changing to two pin headers with half-folded pins, there has been no false soldering. Now electronic equipment is developing towards miniaturization and refinement, and the pin distance of the RJ connector also ranges from 2.54mm to 1.27mm and then to 0.5mm. The smaller the lead distance, the higher the production process requirements. The lead distance should depend on the company's production technology level. Blindly seeking a small distance will cause difficulties in production and maintenance.

Product Tags

HANRUN connector