Home Categories Send inquiry

Factory source 10 Pin RJ45 Modular Jack - ZE120552NN 8P8C Ethernet Connector Module Jack 1X2 RJ45 With Color – Zhusun

ZE120552NN 8P8C Ethernet Connector Module Jack 1X2 RJ45 With Color
Categories  Connectors, Interconnects
 Modular Connectors - Jacks
Application-LAN  ETHERNET(NoN POE)
Connector Type  RJ45
Number of Positions/Contacts  8p8c
Number of Ports  1x2
Applications Speed  RJ45 Without Magnetics
Mounting Type  Through Hole
Orientation  90° Angle (Right)
Termination  Solder
Height Above Board  11.50 mm
LED Color  Without LED
Shielding  Unshielded
Features  Board Guide
Tab Direction  UP
Contact Material  Phosphor Bronze
Packaging  Tray
Operating Temperature  -40°C ~ 85°C
Contact Material Plating Thickness  Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material  Brass
Housing Material  Thermoplastic
RoHS Compliant  YES-RoHS-5 WIth Lead in Solder Exemption
  In Ethernet equipment, when the PHY chip is connected to RJ, a network transformer is usually added. The center tap of some network transformers is grounded. Some are connected to the power supply, and the power supply value can be different, including 3.3V, 2.5V, and 1.8V. Then how to connect the middle tap (PHY end) of the transformer? B. Why is it connected to a different voltage when it is connected to the power supply? This is also determined by the UTP port level specified in the PHY chip data used. The level must be connected to the corresponding voltage, that is, if it is 1.8v, it will be pulled up to 1.8v, if it is 3.3v, it will be pulled up to 3.3v.        

  • Factory source 10 Pin RJ45 Modular Jack - ZE120552NN 8P8C Ethernet Connector Module Jack 1X2 RJ45 With Color – Zhusun Related Video: